Water-Based Epoxy Flooring Kit (2 Gallons)

Water-Based Epoxy Flooring Kit is a two component solids epoxy colored coating designed for applications where a high build colorfast impact resistant floor is needed. This product is recommended for a high build topcoat or basecoat on concrete or masonry. Product is suitable in many chemical exposure environments.

RECOMMENDED FILM THICKNESS:

6-12 mils

COVERAGE PER GALLON:

133-267 square feet per gallon @ 6-12 mils

MIX RATIO:

12 pounds (1 gallon) part A to 4.05 pounds (.50 gallons) part B (volumes approx.) (standard colors)

SHELF LIFE: 1 year in unopened containers

FINISH CHARACTERISTICS: Gloss (60 at 60 degrees @ glossmeter)

ABRASION RESISTANCE: Taber adrasor CS-17 calibrase wheel with 1000 gram total load and 500 cycles = 45 mg loss

ADHESION: 430 psi @ elcometer (concrete failure, no delamination)

VISCOSITY: Mixed= 500-800 cps (typical, most colors)

FLEXURAL STRENGTH: 9,300 psi @ ASTM D790-1/2”x1/2” bars span 4”

YIELD COMPRESSIVE STRENGTH: 7,100 psi @ ASTM D695 –1/2”x1/2” bars

TENSILE STRENGTH: 6,000 psi @ ASTM D638 –testing dimensions F=2.25’, W=0.500”, T= 0.125”, D=4.5” and rate= 0.2”/minute

GARDNER VARIABLE IMPACTOR: 50 inch pounds direct –passed

ULTIMATE ELONGATION: 7.5%HARDNESS:Shore D= 80

CURE SCHEDULE (70°):

pot life –1 1/2 gallon volume …………………………..40-55 minutes

tack free (dry to touch)……………………………………….. 6-9 hours

recoat or topcoat………………………………………………. 10-14 hour

slight foot traffic………………………………………………..12-16 hours

full cure (heavy traffic)… ……………………………………..2-7 days

CHEMICAL RESISTANCE:

REAGENT                                  RATING

xyleneC1,1,1 trichloroethane           C

MEK                                                 A

methanol                                          A

ethyl alcohol                                    B

skydrol                                             B

10% sodium hydroxide                    C

50% sodium hydroxide                    C

10% sulfuric acid                             C

70% sulfuric acid                             A

10% HC1 (aq)                                 C

5% acetic acid                                 C

Rating key: A -not recommended, B -2 hour term splash spill, C -8 hour term splash spill, D -72 hour immersion, E -long term immersion. NOTE: extensive chemical resistance information is available through your sales representative.