• Rubberseal Roll Grade must be thoroughly mixed using a paddle mixer at SLOW (approximately 100 RPM) speed. Caution: Mixing at medium or high speed may cause seperation of the polymer, creating small chunks of material in the product.  Mix for 5 minutes prior to installation, until material is entirely homogeneous (any film will return to solution with mixing).   If material sits more than 3 hours, remix for 5 minutes.   Do NOT add water, solvents, or any other materials to the product.
• Note: Choose all appropriate safety equipment before use. Refer to Materials Health, Safety and Environmental Data Sheet (MSDS) for more information.